Authentication & Login Settings

Steps

1. In the module menu, click Administration.

2. Expand System Configurations, and click Authentication & Login Settings.
   The Authentication & Login Settings page is displayed.

3. Provide the required information in the fields, as described in the following table:

   Field	Description
   Login Mode	Select either of the options described below: Masterworks - To enable users to access the application using Masterworks Login page. The authentication method is automatically set as Masterworks . External IDP or Mixed - To enable users to access the application using an external identity provider service, such as ADFS, Azure Active Directory. Appropriate authentication method must be selected.
   Authentication Method	For External IDP or Mixed login modes, select the required authentication method.
   Reset Password Timeout	Enter the time duration (in seconds) after which the reset password link expires.
   Session Timeout Notification Prior (in seconds)	Enter the time in seconds. The session timeout notification is displayed after the specified time duration prior to the session expiry.

4. In the Password Configurations section, provide the required information in the fields, as described in the following table:

   Field	Description
   Minimum Password Length	Enter the number to define the minimum number of characters required in a password.
   Must include lower case letters	Select the check box to define the characteristics of the password.
   Must include upper case letters
   Must include numbers
   Must include special characters
   User ID or part of User ID should not be the part of password
   Default Password expiration period (in days)	By default, the Never check box is enabled, which means the password never expires. To set an expiration period, enter the number of days after which the default password expires.
   User Must Change the Password at First Logon	By default, the check box is selected to notify the users to change the password at first logon.
   Enforce Password History	By default, the Not Defined check box is selected. To enforce password history, remove the check box and enter the number of unique new passwords that must be associated with a user account before an old password can be reused.

5. In the Login Attempts Configurations section, provide the required information in the fields, as described in the following table:

   Field	Description
   Maximum Login Attempts	By default, the maximum login attempts is set to 3. Enter the value to set the maximum number of unsuccessful login attempts that will cause a user account to be locked.
   Reset unsuccessful Login attempt counter (in mins)	By default, the counter is set to 60 minutes. Enter the value to define the number of minutes that must pass to reset the account that is locked due to maximum number of unsuccessful login attempts.

6. Click Save.

© Aurigo Software Technologies Inc.